A105 B16.5 Structural carbon steel ANSI flange

Description ASME B16.5 .B16.47. B16.36.BS.MSS.AWWATypeWeld Neck flange , Lap Joint Flange , Threaded flange, Socket Welding Flange,   Blind Flange,  Slip on Flange . MaterialStainless steel , Alloy steel.. Dupl

Featured Products

Description
 
ASME B16.5 .B16.47. B16.36.BS.MSS.AWWA
TypeWeld Neck flange , Lap Joint Flange , Threaded flange, Socket Welding Flange,   Blind Flange,  Slip on Flange . 
MaterialStainless steel , Alloy steel.. Duplex/Super Duplex, Aluminum 
Size3/4"-60" 
Pressure150#,300#,600#.900#,1500#,2500# 
TechnicsForged, 
Connectionwelding 
Sealing surfaceFF RF M F M TG  RJ 
Surface
treatment
Anti-rust Oil,  
Producing processBillet-cutting-forging-heating-lathe-drilling-inspection-marking-packing-export-din flange 
Application FieldsChemical Industry /Petroleum Industry /Power Industry/Metallurgical Industry
Building Industry /Ship-building Industry 
 
Supply Capacity8000tons  per  year 
Min Order Quantity1 ton 
Inspectionfactory in-house self check or Third Party inspection 
PACKINGplywood cases, pallets, nylon bags or according to the customers' requirements,plastic cap 
DeliveryIt is generally Within 25 days after receiving your payment 
TRADE TERMFOB, CNF&CFR, CIF 
PAYMENTTT or L/C 
CERTIFICATESISO-9001/2000,PED,ABS.TUV.DNV

Flange

1. Application:
For seal or connect of pipe/tub-e lines
2. Material:
304,304L,316,316L,carbon steel or other material on request
3. Standard:
ANSI,DIN,JIS,BS,EN1092-1
4. Size:
DN15 (1/2") to DN5000 (200")
5. Type:
Threaded Flanges, Socket Welding Flanges, Blind Flanges, Other Flanges
 
Types' Specification
Welding neck
1, Preferred for high-pressure, subzero or elevated temperature
2, Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion
3, Easily radiographed and provides excellent stress distribution
Slip-on
1, Not normally used in high-stress applications due to low hub and weld attachment
2, Silps over outside of pipe
3, Inside of flange welded at hub and end of pipe
Lap joint
1, Used where bolt alignment or access for cleaning is required
2, Similar to slip-on flange when used with lap joint stub end
3, Radius at intersection of flange face and bore to match lap joint stub end
Threaded
1, Used where welding would would be hazardous
2, Designed for low-pressure and non-cyclic applications
3, Bore is threaded to match pipe thread
4, Tapered to seal pipe and flanges
Socket welding
1, For small-diameter chemical processes, hydraulic and stream distribution lines
2, Similar to slip-on flange
3, Counter bore matches pipe bore, allowing unrestricted flow
4, Counter bore from hub side fits pipe's outer diameter -  can insert pipe in socket with fillet weld at hub
Blind
1, Used to close ends of piping
2, Has no bore
3, Permits access to sealed lines
Other flanges
Orifice, Expander, Reducing, Lightweight, Studding Outlets, Long Weld Necks,Metric, Navy Drawings, Customer Drawings
Any Requests you can contact us for catalogues. Thanks.
A105 B16.5 Structural Carbon Steel ANSI Flanges
A105 B16.5 Structural Carbon Steel ANSI Flanges
A105 B16.5 Structural Carbon Steel ANSI Flanges



 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours